Personality

Pi r not square. Pi r round.

AT, are you thinking of special cases where R = 2?
In your analogy, are you saying your memories are a special case? I still don't really understand exactly what you are doing.

AT also, what do you mean by "the difference between using memories?"

I've discovered how to clone memories. or where (key1) makes 2 different memories. now I was just wanting to make it where I can erase a memory with the inclusion of another memory..

AT, I think you need "as only" for both memories.

3 memories.. all have as only.. 3 memories clone into 1 separate memory..

AT, what exactly do you mean by cloning? If you have a KP like "What are you reading now?" and the chatter triggers a seek like "I am reading", do you have 3 memories generated (i.e."IQ" = "smart"; "book" = "(postkey)"; "communication" = "open") or do you only pick up one memory at a time? Are you talking about 3 memories you created in your settings or three different things you store within one memory in settings?

4 memories for the subject of an age.

4 different age groups.. each one clones into mem-age

I will be interacting with kids, teenagers, young adults, and middle aged adults... This.. will branch off for different subjects.. like a real conversation would take place.

After this is perfected.. it will be a nucleus for another set of formulas.

Make a plug-in for the various ages. then use conditional AI script if (mem-age) is "whatever". You don't need four different memories.

can "whatever" be "12-15" ???

You: Hi Prob 123, I am 13 years old
Me: hey
You: I love Canada Dry.. Why does everyone else hate it?
Me: I am a new bot and I don't understand canadiens
You: Screw you!
ME: Where did a kid like you learn such rude behavior.

<?PF if (mem-Age) is "9-15"; ?>

I am assuming that ..that is what you and everyone else is basically trying to tell me.

Yes, I am not sure if the 9-15 will work you might have to list them but it should work that way. or
make a memory for young and use
I am (13|14|15) < ? PF remember (key1) as only "young"; ?>

You are too young to talk that way!
PF if (mem-young) exists; ?>

I also used ordinal if you don't want a long term memory the following is for a what number comes after

what number comes after ([1234567890,]+) (re) [75,0] <?PF raw ?>
    Ok after (key1).... <?PF remember (key1) as only "ordinal" ?>
        + xnomatch [0]
        One <?PF if (mem-ordinal) is "0"; ?>
        Two <?PF if (mem-ordinal) is "1"; ?>
        Three <?PF if (mem-ordinal) is "2"; ?>
        Four <?PF if (mem-ordinal) is "3"; ?>
        Five <?PF if (mem-ordinal) is "4"; ?>
        Six <?PF if (mem-ordinal) is "5"; ?>
        Seven <?PF if (mem-ordinal) is "6"; ?>
        Eight <?PF if (mem-ordinal) is "7"; ?>
        Nine <?PF if (mem-ordinal) is "8"; ?>
        Ten <?PF if (mem-ordinal) is "9"; ?>
        Eleven <?PF if (mem-ordinal) is "10"; ?>
        Twelve <?PF if (mem-ordinal) is "11"; ?>
        Thirteen <?PF if (mem-ordinal) is "12"; ?>
        Fourteen <?PF if (mem-ordinal) is "13"; ?>
        Fifteen <?PF if (mem-ordinal) is "14"; ?>
        Sixteen <?PF if (mem-ordinal) is "15"; ?>
        Seventeen <?PF if (mem-ordinal) is "16"; ?>
        Eighteen <?PF if (mem-ordinal) is "17"; ?>
        Nineteen <?PF if (mem-ordinal) is "18"; ?>
        Twenty <?PF if (mem-ordinal) is "19"; ?>
        Twenty one <?PF if (mem-ordinal) is "20"; ?>
        Twenty two <?PF if (mem-ordinal) is "21"; ?>
        Twenty three <?PF if (mem-ordinal) is "22"; ?>
        Twenty four <?PF if (mem-ordinal) is "23"; ?>
        Twenty five <?PF if (mem-ordinal) is "24"; ?>
        Twenty six <?PF if (mem-ordinal) is "25"; ?>
        Twenty seven <?PF if (mem-ordinal) is "26"; ?>
        Twenty eight <?PF if (mem-ordinal) is "27"; ?>
        Twenty nine <?PF if (mem-ordinal) is "28"; ?>
        Thirty <?PF if (mem-ordinal) is "29"; ?>
        Thirty one <?PF if (mem-ordinal) is "30"; ?>
        Thirty two <?PF if (mem-ordinal) is "31"; ?>
        Thirty three <?PF if (mem-ordinal) is "32"; ?>
        Thirty four <?PF if (mem-ordinal) is "33"; ?>
        Thirty five <?PF if (mem-ordinal) is "34"; ?>
        Thirty six <?PF if (mem-ordinal) is "35"; ?>
        Thirty seven <?PF if (mem-ordinal) is "36"; ?>
        Thirty eight <?PF if (mem-ordinal) is "37"; ?>
        Thirty nine <?PF if (mem-ordinal) is "38"; ?>
        Forty <?PF if (mem-ordinal) is "39"; ?>
        Forty one <?PF if (mem-ordinal) is "40"; ?>
what number comes before (*),number is before (*) [50,0] <?PF remember (key1) as only "ordinal" ?>
    Let me see you want the number before (key1)?
        + xnomatch [0]
        One <?PF if (mem-ordinal) is "two"; ?>
        Two <?PF if (mem-ordinal) is "three"; ?>
        Three <?PF if (mem-ordinal) is "four"; ?>
        Four <?PF if (mem-ordinal) is "five"; ?>
        Five <?PF if (mem-ordinal) is "six"; ?>
        Six <?PF if (mem-ordinal) is "seven"; ?>
        Seven <?PF if (mem-ordinal) is "eight"; ?>
        Eight <?PF if (mem-ordinal) is "nine"; ?>
        Nine <?PF if (mem-ordinal) is "ten"; ?>
        Ten <?PF if (mem-ordinal) is "eleven"; ?>
        Eleven <?PF if (mem-ordinal) is "twelve"; ?>
        Twelve <?PF if (mem-ordinal) is "thirteen"; ?>
        Thirteen <?PF if (mem-ordinal) is "fourteen"; ?>
        Fourteen <?PF if (mem-ordinal) is "fifteen"; ?>
        Fifteen <?PF if (mem-ordinal) is "sixteen"; ?>
        Sixteen <?PF if (mem-ordinal) is "seventeen"; ?>
        Seventeen <?PF if (mem-ordinal) is "eighteen"; ?>
        Eighteen <?PF if (mem-ordinal) is "nineteen"; ?>
        Nineteen <?PF if (mem-ordinal) is "twenty"; ?>
        Twenty <?PF if (mem-ordinal) is "twenty one"; ?>
        Twenty one <?PF if (mem-ordinal) is "twenty two"; ?>
        Twenty two <?PF if (mem-ordinal) is "twenty three"; ?>
        Twenty three <?PF if (mem-ordinal) is "twenty four"; ?>
        Twenty four <?PF if (mem-ordinal) is "twenty five"; ?>
        Twenty five <?PF if (mem-ordinal) is "twenty six"; ?>
        Twenty six <?PF if (mem-ordinal) is "twenty seven"; ?>
        Twenty seven <?PF if (mem-ordinal) is "twenty eight"; ?>
        Twenty eight <?PF if (mem-ordinal) is "twenty nine"; ?>
        Twenty nine <?PF if (mem-ordinal) is "thirty"; ?>
        Thirty <?PF if (mem-ordinal) is "thirty one"; ?>
        Thirty one <?PF if (mem-ordinal) is "thirty two"; ?>
        Thirty two <?PF if (mem-ordinal) is "thirty three"; ?>
        Thirty three <?PF if (mem-ordinal) is "thirty four"; ?>
        Thirty four <?PF if (mem-ordinal) is "thirty five"; ?>
        Thirty five <?PF if (mem-ordinal) is "thirty six"; ?>
        Thirty six <?PF if (mem-ordinal) is "thirty seven"; ?>
        Thirty seven <?PF if (mem-ordinal) is "thirty eight"; ?>
        Thirty eight <?PF if (mem-ordinal) is "thirty nine"; ?>
        Thirty nine <?PF if (mem-ordinal) is "forty"; ?>
        Forty <?PF if (mem-ordinal) is "forty one"; ?>
        Forty one <?PF if (mem-ordinal) is "forty two"; ?>
what number comes before ([1234567890,]+) (re) [75,0] <?PF raw ?>

ok that was interesting to read

Damn straight MonkeySlayer. I love it when Prob gets all type-y. I also copy and paste what Psi types when the spirit moves him.